Armour Surface Coatings

Linear metres of joints sealable with one 310 ml cartridge of Fugabella® Eco Silicone

Depth Width 5 mm 7 mm 10 mm 15 mm 20 mm

5 mm ≈ 12,4 m ≈ 8,9 m ≈ 6,2 m – –

7 mm – ≈ 6,4 m ≈ 4,4 m ≈ 3 m –

10 mm – – ≈ 3 m ≈ 2,1 m ≈ 1,6 m

15 mm – – – ≈ 1,4 m ≈ 1,1 m

20 mm – – – ≈ 1,1 m ≈ 0,8 m

Appearance White or grey thixotropic paste

Specific weight ≈ 1,02 kg/dm3

Chemical nature neutral cross-linked silicone sealant

Shelf life ≈ 18 months in the original packaging

Warning protect from frost, and avoid direct exposure to sunlight and sources of heat

Pack 310 ml cartridge

Max. allowed movement ≤ 25% ISO 9046

Joint minimum width ≥ 5 mm

Joint max. width ≤ 25 mm

W/D ratio sealing cross-section > 1 / < 2

Temperature range for application from +5 °C to +40 °C

Curing time ≥ 10 min.

Reticulation ≈ 3 mm / 24 hrs

Shrinkage ≤ 3% D IN 52 451

Coverage see approximate coverage table

• Quality assured
• No chemicals added
• Cost effecti

• Good quality
• Highly effective
• Brighten up the tiles

• VOC Indoor Air Quality (IAQ)- Volatile organic compound emissions
• Conformity E C 1-R plus GEV-Emicode GEV certified 5727/11.01.02
• Tensile adhesion (concrete/porcelain tiles) after 28 days ≥ 1 N / mm2 E N 1348
• Adhesion after heat ageing ≥ 0,5 N / mm2 E N 1348
• Adhesion after water immersion ≥ 0,5 N / mm2 E N 1348
• Adhesion after freeze-thaw cycles ≥ 0,5 N / mm2 E N 1348
• Working temperature from -30 °C to +80 °C

Appearance Coloured thixotropic paste

Specific weight ≈ 1,4 kg/dm3

Chemical nature moisture-curing polyurethane paste

Shelf life ≈ 12 months in the original packaging

Warning Protect from frost, avoid direct exposure to sunlight and sources of heat

Pack 310 ml cartridge

Max. allowed movement ≤ 10% ISO 9046

Joint min.width ≥ 6 mm

Joint max.width ≤ 35 mm

Sealing section ratio W/D:

- up to 12 mm 1/1

- from 12 to 35 mm 2/1

Temperature range for application from +5 °C to +35 °C

Curing time ≈ 1 hr

Reticulation time ≈ 4 mm / 24 hrs

Coverage see approximate coverage table

Values taken at +23 °C, 50% R.H. and no ventilation.

• Accurate composition
• High pH value
• Effectiveness

Appearance White or grey pre-mixed

Apparent volumetric mass ≈ 1,04 kg/dm3 UEAtc/CSTB 2435

Mineralogical nature of inert material silicate - crystalline

Grading ≈ 0 – 800 μm

Shelf life ≈ 12 months in the original packaging in dry environment

Pack Bags 25 kg

Mixing water for use as a slurry key ≈ 9 l / 1 x 25 kg bag

Temperature range for application from +5 °C to +35 °C

Adjustability ≥ 30 min.

Foot traffic ≈ 24 hrs

Grouting ≈ 7 – 14 days

Interval before normal use ≈ 14 days

Coverage * ≈ 2 – 3 kg/m2

VOC Indoor Air Quality (IAQ) - Volatile organic compound emissions

Conformity E C 1-R plus GEV-Emicode GEV certified 4616/11.01.02

Tensile adhesion (concrete/porcelain tiles) after 28 days ≥ 2,5 N/mm2 EN 1348

Shear adhesion (porcelain tiles/porcelain tiles) after 28 days ≥ 2,5 N/mm2 ANS I A-118.1

Shear adhesion after water immersion ≥ 1 N/mm2 ANS I A-118.1

Shear adhesion after heating to +100 °C ≥ 1 N/mm2 ANS I A-118.1

Durability test:

- adhesion after heat ageing ≥ 2,5 N/mm2 EN 1348

- adhesion after water immersion ≥ 1 N/mm2 EN 1348

- adhesion after freeze-thaw cycles ≥ 1 N/mm2 EN 1348

- adhesion after straining cycles ≥ 1 N/mm2 SAS Technology

Working temperature from -30 °C to +90 °C

VOC Indoor Air Quality (IAQ) - Volatile organic compound emissions

Conformity EC 1-R plus GEV-Emicode GEV certified 1959/11.01.02

HIGH-Tech

Flexural strength after 28 days ≥ 7 N/mm2 EN 12808-3

Compressive strength after 28 days ≥ 30 N/mm2 EN 12808-3

Resistance to frost-thaw cycles:

- Flexural ≥ 2,39 N/mm2 EN 12808-3

- Compressive ≥ 27 N/mm2 EN 12808-3

Resistance to abrasion after 28 days ≤ 265 mm3 EN 12808-2

Water absorption after 30 min. ≤ 1,3 g EN 12808-5

Water absorption after 240 min. ≤ 3,5 g EN 12808-5

Colour Fastness see colour chart UNI EN ISO 105-A05

Resistance to fungal contamination class F+ CSTB SB-08-103

Resistance to bacterial contamination class B+ CSTB SB-2008-097

Working temperature from -40 °C to +90 °C

Conformity CG2 WA ISO 13007-3

Appearance Coloured thixotropic paste

Specific weight ≈ 1,35 kg/dm3

Chemical nature moisture-curing polyurethane paste

Shelf life ≈ 12 months in the original packaging

Warning Protect from frost, avoid direct exposure to sunlight and sources of heat

Pack 310 ml cartridge

Max. allowed movement ≤ 25% ISO 9046

Joint min.width ≥ 8 mm

Joint max.width ≤ 35 mm

Sealing section ratio W/D:

- up to 10 mm 1/1

HIGH-Tech

Shear adhesion after 7 days ≥ 4 N/mm2 EN 12003

Durability test:

- Shear adhesion after water immersion ≥ 3,5 N/mm2 EN 12003

- Shear adhesion after thermal shock ≥ 3,5 N/mm2 EN 12003

Adhesion to concrete after 7 days ≥ 2,5 N/mm2 (concrete yield) EN 1348

Ultimate elongation after 7 days ≈ 30%

Working temperature from -40 °C to +110 °C

Conformity R2 T EN 12004