Armour Surface Coatings

Hyperdesmo^® PB Mono is an economic, quick-curing, one component, thixotropic, bitumen-extended polyurethane fluid. It produces a hydrophobic, elastic membrane with very strong adhesion to most types of substrates, as well as bituminous, and excellent mechanical and chemical resistance properties. It is ideal for application on vertical surfaces: No running, no bubbling.

Waterproofing coating for protection of:

• Foundation walls
• Wet rooms
• Under tile roof waterproofing

HYPERDESMO^® is a one component polyurethane fluid which cures with the humidity in the atmosphere. It produces a highly elastic membrane with strong adhesion to many types of surfaces. It contains a small percentage of xylol, and may be thinned with SOLVENT-01 if necessary.

It is based on pure elastomeric hydrophobic polyurethane resin plus special inorganic fillers, which result in excellent mechanical, chemical, thermal, UV and natural element resistance properties.

Apply with brush, roller or airless spraying in two coats, at least, with minimum total consumption of 1.5-1.8 kg/m2.

Waterproofing coating for protection of:

• Tiles,
• gypsum and cement boards,
• polyurethane insulation foams,
• bathrooms,
• verandas and balconies,
• roofs,
• light roofing made of metal or fibrous cement,
• asphalt membranes,
• EPDM membranes,
• tanks,
• car parks and stadium stands,
• bridge platforms,
• irrigation channels.

HYPERDESMO^®-CLASSIC is a simple and economic solution for waterproofing and protection. It is a one component, low viscosity, polyurethane fluid which cures with the humidity in the atmosphere to produce a highly elastic membrane with strong adhesion to many types of surfaces.

The product is based on pure elastomeric hydrophobic polyurethane resin plus special inorganic fillers, which result in excellent mechanical, chemical, thermal, UV and natural element resistance properties.

Apply with brush, roller or airless spraying in two coats. Minimum total consumption: 1.2-1.5 kg/m2.

Waterproofing coating for protection of:

• Gypsum and cement boards,
• tiles (underneath),
• roofs,
• light roofing made of metal or fibrous cement,
• asphalt membranes.

HYPERDESMO^®S-WR is a result of Alchimica’s investment in new production facilities and polymerization procedures. This investment facilitated the manufacture of a low solvent Hyperdesmo® i.e a non-flammable material without hazardous transportation limitations (non-imo).

The product is a one component polyurethane fluid which cures with the humidity in the atmosphere. It produces a highly elastic, hydrophobic membrane and has been designed to offer excellent long term waterproofing of wet rooms, substructures and any application not exposed to UV. The rheology of the material is such that it allows easy application even on vertical substrates.

HYPERDESMO^®-LV is a one component, low viscosity, polyurethane fluid which cures with the humidity in the atmosphere. It produces a durable but highly elastic membrane with strong adhesion to many types of surfaces. It contains a small percentage of solvent (xylol), and, so, doesn’t require further thinning.

Based on pure elastomeric hydrophobic polyurethane resin plus special inorganic fillers, it displays excellent mechanical, chemical, thermal, UV and natural element resistance properties.

Apply with brush, roller or airless spraying in two coats. Minimum total consumption: 1.5-1.8 kg/m².

Waterproofing coating for protection of:

• Gypsum and cement boards,
• bathrooms,
• verandas and balconies,
• roofs,
• light roofing made of metal or fibrous cement,
• asphalt membranes,
• EPDM membranes,
• stadium stands,
• car parks,
• bridge platforms,
• irrigation channels.

• Bathrooms,
• verandas and balconies (under tile),
• flower pots,
• roofs (as basecoat),
• basements, foundations (not a humidity barrier).

• Water tanks made of concrete, steel or other material,
• prefabricated concrete tanks,
• drinking water tanks,
• tanks with wall movement due to expansion and contraction.

It is a quick-curing, one component, thixotropic, bitumen-extended polyurethane fluid. It produces a hydrophobic, elastic membrane with very strong adhesion to most types of substrates, as well as bituminous, and excellent mechanical and chemical resistance properties.

It is ideal for application on vertical surfaces: No running, no bubbling.

Waterproofing coating for protection of:

· Gypsum and cement boards,

· asphalt membranes (for repair also),

· cementitious substrates,

· roofs,

· light roofing made of metal or fibrous cement,

· basements,

· foundations,

· closed spaces with high humidity.

A one component, quick moisture curing, bitumen extended, polyurethane liquid membrane. Upon curing it produces an elastic, hydrophobic membrane with strong adhesion on all common construction substrates. One very important characteristic of this product is its excellent humidity barring property.

Waterproofing coating for protection of:

· Gypsum and cement boards,

· asphalt membranes (for repair also),

· cementitious substrates,

· roofs,

· light roofing made of metal or fibrous cement,

· basements,

· foundations,

· closed spaces with high humidity.

HYPERDESMO^®-PB-2K is a fast-curing, two-component, bitumen-extended polyurethane fluid. It produces a highly elastic membrane with strong adhesion to many types of surfaces and excellent mechanical and chemical resistance properties.

It is based on pure elastomeric hydrophobic polyurethane resin and is extended with chemically polymerised virgin bitumen.

Apply with brush, roller, spatula or airless spraying. Minimum consumption: 1.0-1.5 lt/m².

Waterproofing coating for protection of:

• Gypsum and cement boards,
• polyurethane insulation foams,
• asphalt membranes,
• EPDM membranes,
• bathrooms (under tiles),
• verandas and balconies (under tiles),
• flower pots and roof-top gardens,
• roofs,
• light roofing made of metal or fibrous cement,
• non-potable water tanks,
• basements,
• foundations,
• bridge platforms,
• "cut-and-cover” tunnels,
• irrigation channels.

HYPERDESMO^®-815 is a simple and economic solution for waterproofing and protection. It is a one component, low viscosity, polyurethane fluid which cures with the humidity in the atmosphere to produce a highly elastic membrane with strong adhesion to many types of surfaces.

The product is based on pure elastomeric hydrophobic polyurethane resin plus special inorganic fillers, which result in excellent mechanical, chemical, thermal, UV and natural element resistance properties.

Apply with brush, roller or airless spraying in two coats. Minimum total consumption: 1.2-1.5 kg/m2.

For waterproofing and protection of:

• Gypsum and cement boards,
• tiles (underneath),
• roofs,
• light roofing made of metal or fibrous cement,
• asphalt membranes.